Where do you position the bridge on a violin?
It should be straight and parallel to the fingerboard and centered between the f-holes. The feet of the bridge should lay flat with the belly of the violin. Since your instrument and the bridge are made of wood, they both can expand and contract, causing the bridge to lean.
Where should I place my Cellpo Soundpost?
If the post is moved to the right, the E-string becomes strong. When moved to the left, the G-string becomes strong leaving the E-string weak. The second measurement is the distance of the soundpost from the backside of the bridge foot….Placement.
| Distance of back of bridge to soundpost (4/4 size) | |
|---|---|
| Cello | 5.0 – 6.0mm |
How is the bridge and Soundpost held into place?
In a string instrument, the sound post or soundpost is a dowel inside the instrument under the treble end of the bridge, spanning the space between the top and back plates and held in place by friction. The bow has also been referred to as the soul of these instruments. The Italians use the same term, anima, for this.
Do you need a soundpost?
Your violin, viola, cello or double bass needs the soundpost to be where it belongs so you can have the best quality tone and responsiveness. Remember it’s the soul of the instrument. It’s also in place as a protection for the spruce top.
What does a soundpost do in a violin?
The sound post plays an important role transferring the vibrations from the top plate to the back plate. The sound post is fit to both the back and top plates, and is precisely placed in a position relative to the bridge and the bass bar.
What is the purpose of the Soundpost?
Is it time to “adjust” the sound post? The sound post plays an important role transferring the vibrations from the top plate to the back plate. The sound post is fit to both the back and top plates, and is precisely placed in a position relative to the bridge and the bass bar.
What is a soundpost crack?
Almost without exception, a soundpost crack is the result of a sharp jolt, when that sharp-edged, hard dowel turns from a piston into a spike, cracking the wood it rests against. As substantial as the cost of the repair will be, it’s easily dwarfed by the loss of value.
How high should a violin bridge be?
around 33 mm high
The bridge should be around 33 mm high for a violin. This corresponds to a fingerboard projection of 27 mm. There is a relationship between how wide the bridge is and its height, and standard bridge models are designed to work best within this relationship.
